SunTouch ProMelt Contactor Pro, CP-50, CP-100, CP-200

The SunTouch ProMelt Contactor Pro Relay Panels control systems of any size with a compatible ProMelt Control. ProMelt Contactor Pro Panels are available in 50, 100, and 200 Amp models to operate systems with 120, 208, 240, or 277 VAC power. A built-in 24 VAC transformer provides power to the connected control. Each NEMA Type 1 panel measures 12" wide by 12" high by 4" deep & includes knockouts for conduit.

An additional 200-amp extension panel allows coverage for even larger systems. 120V, 208V, 240V, or 277V is supplied to the panel and a 24V Class 2 transformer allows connection to the snow detector.

Each Contactor Pro panel is complete with "system on" indicator light, manual override by a 4-hr timer, simple 24V wire terminal connections to the snow detector, and outputs for connection to an extension panel. The CP-50 has one 50-amp contactor, the CP-100 has two 50-amp contactors, and the CP-200 has four 50-amp contactors.

Systems should be designed to connect one or more ProMelt Cables or Mats in combinations not to exceed the capacity of individual 50-amp contactors. Each panel is NEMA Type 1 for mounting indoors on a wall, has knockouts for conduit, and measures 12" x 12" x 4".

• "System On" indicator light
• Manual override dial with a 4-hour timer
• A built-in 24 VAC transformer that provides power to the connected control

Select the best control package for your installation.

• Total the amps of the mat and cable for each zone before comparing control options.
• Zones with less than 60 amps can use an all-in-one control solution (PM-2C or PM-5).
• The PM-L1 to L3 & PM-519 kits connect to a ContactorPro panel to control zones of any size.

*SunTouch now requires all orders shipping from the factory to ship with signature required.

*Works with MasterHeat Snow Melting Cables and Mats

Download User Manual