Skip to the beginning of the images gallery

Tec Feather Edge Skim Coat - 10 lb

The Tec Feather Edge Skim Coat is a high quality, cement-based compound designed to skim coat, smooth and level irregularities from featheredge up to 1/2" (12 mm).

$13.63

Brand: Tec

Availability: On order. This item will ship when back in stock (More Info)

Shipping: Standard (More Info)

SKU

TEC-SKIM TA-330

Details

Feather Edge Skim Coat is a high-quality, cement-based compound that is designed to skim coat, smooth and level irregularities from feather edge up to 1/2" (12 mm). It rapidly sets to install most floor coverings in as little as 15-20 minutes. For most applications, the use of a primer is not required.

It can be used over most substrates and provides a suitable surface for even the most demanding floor coverings, such as VCT, sheet vinyl, etc. It is ideal for use as an embossing leveler when mixed with TEC Patch Additive (embossing applications require TEC Patch Additive. No patch additive is required if surface has been primed with TEC Multipurpose Primer).

Tec Feather Edge Skim Coat Features:

Self-drying
Fast setting - install flooring in as soon as 15-20 minutes
Featheredge up to 1/2" (12 mm)
Sandable
For most applications, use of a primer is not required
VOC 0

Installation:

Mixing: Mix only as much TEC Feather Edge that can be used in a 15-20 minute time period. Use Immediately after mixing. Add the bag of TEC Feather Edge slowly into 2-1/4 - 2-1/2 quarts (2.13-2.37 L) of clean, cool water while mixing at a low speed (not exceeding 300 rpm to prevent entraining air). For smaller amounts, use a mixing ratio of 2 parts powder to 1 part water. Mix thoroughly to a smooth, lump free consistency. Do not overwater.

Coverage

Coverages shown are approximate. Actual coverages may vary according to substrate conditions and thickness of applications.

Application Depth	Approximate Coverage per 10 lbs. (4.54 kg)
1/8" (3 mm)	30-36 sq. ft. (2.8-3.3 m2)
1/4" (6 mm)	15-18 sq. ft. (1.4-1.7 m2)
1/2" (12 mm)	7.5-9 sq. ft. (0.7-0.8 m2)
Embossing	300-500 sq. ft. (27.9-46.5 m2)

Physical Properties:

Physical State: Dry powder
Color: Gray
Compressive Strength (ASTM C109): 3600 psi (24.6 MPa)
Pot Life: 15-20 minutes
Install Floor Covering: 15-60 minutes
Storage: Store away from direct sunlight in a well-ventilated, cool, dry area. If storing after opening, remove all air from container and seal tightly.
Packaging: 10 lb. (4.54 kg) plastic bag
Shelf Life: Maximum 1 year from date of manufacture in properly stored, unopened package.

Recommended Substrates: