Laticrete Hydro Ban Cementitious Waterproof Membrane - 30 lb bag
Brand: Laticrete
Availability: Sold In Store - Ships From Store (6 available in store). (More Info)
Shipping: Standard (More Info)
The Laticrete Hydro Ban Cementitious Waterproof Membrane is a one component, polymer fortified, cement based waterproofing material that mixes with water. This product can be used on walls and floors in wet areas; bathrooms, kitchens, swimming pools, water features and fountains, balconies and terraces over unoccupied space.
Hydro Ban Cementitious Waterproofing Membrane handles negative & positive hydrostatic pressure up to 2 BARS (29 PSI) when applied at 40 Mils (1mm) thick.
Laticrete Hydro Ban Cementitious Waterproof Membrane Features:
- Suitable for use in partially tiled applications such as at waterlines, tiled swimming lanes, tiled swimming targets
- Flood testing in 2 hours at 70°F (21°C) or higher
- Does not require the use of fabric^
- Can be used under pool plasters
- Bonds directly to metal, PVC and ABS plumbing fixtures
- "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Passes ANSI A118.10 Waterproofing
- Rapid drying for a faster time to tile
- Install tile, brick and stone directly onto membrane
- GREENGUARD certified, LEED compliant
Uses:
- Interior and exterior
- Swimming pools, fountains and water features
- Spas and hot tubs
- Terraces and balconies over unoccupied spaces
Suitable Substrates:
- Concrete
- Concrete and Brick Masonry
- Cement Mortar Bed
- Cement Plaster
- Ceramic Tile and Stone
- Cement Terrazzo
- Cement Backer Board
- Gypsum Wallboard (Interior use only, non-wet areas)
Installation:
Surface temperature must be 50 – 90°F (10 – 32°C) during application and for 24 hours after installation. All substrates must be structurally sound, clean and free of dirt, oil, grease, paint, laitance, efflorescence, concrete sealers or curing compounds. Make rough or uneven concrete smooth to a wood float or better finish with a underlayment. Do not level with asphalt based products. Maximum deviation in plane must not exceed 1/4" in 10 ft (6 mm in 3 m) with no more than 1/16" in 1 ft (1.5 mm in 0.3 m) variation between high spots. Dampen hot, dry surfaces and sweep off excess water—installation may be made on a damp surface.
Approximate Coverage:
- At 40mil (1mm) Thick - 120 ft2 (11.2 m2) (Waterproofing Only)
- 20mil (.5mm) per coat - 2 Coats
Performance:
- Shelf Life: Factory sealed containers of this product are guaranteed to be of first quality for eighteen (18) months.
- Packaging: 30 lb (13.6kg Bag)
| SKU | L-HYDRO BAN CEM |
|---|---|
| UPC | 720912055843 |
| Weight (lbs.) | 30.0 |
| Non-Returnable | No |
| Manufacturer | Laticrete |
| Manufacturer Part Number | 9259-0030-2 |
| Dimensions (L x W x H) | 18" x 7.1" x 12.4" |