Laticrete Glass Tile Adhesive Lite Modified Mortar -12.5 lb bag - White
Brand: Laticrete
Availability: Sold In Store - Ships From Store (9 available in store). (More Info)
Shipping: Standard (More Info)
Laticrete Glass Tile Adhesive Lite is an ultra-white color and non-sanded which enhances the look of glass mosaics, glass tile, and most any translucent tile or stone. In addition to installing glass tile, Glass Tile Adhesive Lite can also be used with porcelain or ceramic tile. It is a smooth easy-to-trowel consistency and has extended open time for ease of installation. The robust formula provides a high bond strength and exceeds the requirements of ANSI A118.15.
Laticrete Glass Tile Adhesive Lite Features:
- Meets ANSI A118.15, the highest ANSI Standard for higher bond strength and for use in submerged applications
- Lightweight at just 12.5 lb (5.7 kg) the bag is half the weight of traditional tile mortar
- Non-Sanded formula provides a smooth texture and is easy to trowel
- Extended open time improves your productivity
- Consistent, ultra-white color across the entire application area ensures glass tile color is unaffected
- Optimal bond strength with minimal shrinkage provides greater strength without compromising the integrity of the glass
- Single component with no admix needed, just add water and the product is ready to use
- Superior non-sag performance when applied in vertical or inverted applications
- GREENGUARD certified to provide you with assurance that this product meets appropriate indoor air quality standards
- Contains no respirable crystalline silica that exceeds the OSHA action level‡
- Microban antimicrobial technology is integrated at the stage of manufacture providing around-the-clock product protection from the growth of microbes including bacteria, mold and mildew.
Uses:
Designed for interior, exterior, and submerged installations of all types of glass tile over concrete, exterior glue plywood (interior, dry areas only), and a variety of other substrates.
Suitable Substrates:
- Exterior Glue Plywood (Interior Only)
- Concrete Masonry
- Cement Block
- Cement Mortar Bed
- Cement Terrazzo
- Ceramic Tile and Stone
- Gypsum Wallboard
- Cement Backer Board
- Masonry Surfaces
- HYDRO BAN Board
Installation:
All surfaces should be between 40°F (4°C) and 90°F (32°C) and structurally sound, clean and free of all dirt, oil, grease, paint, concrete sealers or curing compounds. Rough or uneven concrete surfaces should be made smooth with Latex Portland Cement Underlayment to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. Concrete slabs must be plumb and true to within 1/4" (6 mm) in 10' (3 m).
Approximate Coverage:
- Approximately 38 - 42 ft2 / (3.5 - 3.9 m2) 12.5 lb (5.7 kg bag) with 1/4" x 1/4" (6 mm x 6 mm) notched trowel.
- Approximately 25 - 30 ft2 / (2.3 - 2.8 m2) 12.5 lb (5.7 kg bag) with 1/4" x 3/8" (6 mm x 9 mm) notched trowel.
- Approximately 75 - 85 ft2 / (7.0 - 7.9 m2) 12.5 lb (5.7 kg bag) with 1/8" x 3/16" (3 mm x 4.5 mm) notched trowel.
Performance:
- Open Time: 40 minutes
- Pot Life: 4 hours
- VOC: 0
- Shelf Life: 2 year. High humidity will reduce the shelf life of bagged product.
- Packaging: 12.5 lb (5.7 kg) bag.
| SKU | L-GTA LITE |
|---|---|
| UPC | 720912062650 |
| Weight (lbs.) | 12.5 |
| Non-Returnable | No |
| Manufacturer | Laticrete |
| Manufacturer Part Number | 0296-0125-22 |
