Laticrete 9235 Waterproofing Membrane and Anti-Fracture Fabric

Laticrete 9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.

Laticrete 9235 Waterproofing Membrane is a thin (.02" [.5mm]), load bearing, flexible, liquid applied waterproofing membrane system consisting of a liquid rubber polymer that is cold applied with an integral reinforcing fabric to provide a seamless waterproof membrane. It’s quickly applied with a paint brush or long nap paint roller to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates (including both common and less ordinary commercial substrates).

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Laticrete 9235 Waterproofing Membrane is available in 2 sizes:

• Mini Unit: 2 gallon (7.6 L) jug of liquid and Laticrete Waterproofing/Anti-Fracture Fabric packed together in one pail - covers approx. 75 S/F
• Full Unit: 6 gallon (23L) pail of liquid only (Anti-Fracture Fabric Sold separately) - covers approx. 300 S/F

Laticrete 9235 Features:

• Safe - no solvents and non-flammable
• Interior and exterior use
• Vertical and horizontal surfaces (including ceilings)
• Thin-only 0.02" (0.5 mm) thick when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
• IAPMO and ICC Approval
• Applies quickly with a paint brush or roller—no special mixing or application equipment needed
• Fast cure-normally ready in hours for finishes
• Install tile, brick, and stone directly onto membrane
• Certified Children and Schools by The GREENGUARD Environmental Institute
• Easy cleanup-just use water while fresh
• Protects concrete & reinforcing steel from corrosion

Uses

• Swimming pools, fountains & water features
• Shower pans, stalls and tub surrounds
• Bathrooms & laundries (industrial, commercial & residential)
• Spas and hot tubs
• Kitchens & Food Processing Areas
• Terraces & balconies over unoccupied spaces
• Countertops
• Facades Steam rooms (when used in conjunction with a vapor barrier)

Suitable Substrates:

• Concrete
• Cement Mortar Bed
• Cement Plaster
• Concrete and Brick Masonry
• Exterior Glue Plywood (Interior Only)
• Gypsum Wallboard
• Ceramic Tile and Stone
• Cement Terrazzo
• Cement Backer Board
• Gypsum Wallboard (Interior use only, non-wet areas)
• Self-Leveling and Patching Compounds

Download Product Brochure
Download User Manual
Download Safety Data Sheet