Ardex S 1-K Waterproofing and Crack Isolation Membrane
Brand: Ardex
Availability: Sold In Store - Ships From Store (More Info)
Shipping: Free on orders over $99 to Continental US (More Info)
Ardex S 1-K Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile installations. It also provides an excellent bonding layer for Ardex tile and stone setting materials. Ardex S 1-K can also be used for crack isolation up to 1/8" (3 mm)
Ardex S 1-K Features:
- Flexible, topside waterproofing for interior floors and walls
- Easy to install with a paint roller or brush
- Use for bathrooms, showers, and other wet areas prior to the installation of tile
- Highly workable consistency; minimal drips and splatters
- Crack isolation up to 1/8" (3 mm)
- Bonds to a wide range of substrates
Installation:
Mixing Ratio: Single-component mix. Do not dilute or mix with additives.
Approximate Coverage:
- 195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall
- 56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall
- Coverage will vary with substrate surface profile, porosity and texture.
Performance:
- Working Time: Unlimited. Seal unused portion to prevent product from drying out.
- First coat: 1 – 2 hours
- Second coat: 12 – 16 hours
- Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions).
- VOC: < 1 g/L, calculated SCAQMD Methods
- 1 gal. (3.78 L) pail
- 3.5 gal. (13 L) pail
- Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing.
- Shelf Life: 12 months
- Warranty: Ardex L.P. Standard Limited Warranty applies
Drying Time:
Packaging:
Calculator Ardex S 1-K
| SKU | AR S 1-K |
|---|---|
| Weight (lbs.) | 8.81 / 44.09 |
| Non-Returnable | No |
| Manufacturer | Ardex |
