Ardex 8+9 Rapid Waterproofing and Crack Isolation Compound Kit

The Ardex 8+9 Rapid Waterproofing and Crack Isolation Compound is a two-component, solvent-free, cement-based membrane.
As low as $103.70

Brand: Ardex

Availability: Sold In Store - Ships From Store (More Info)

Shipping: Standard (More Info)

Only %1 left
SKU
AR 8+9

Ardex 8+9 Rapid Waterproofing and Crack Isolation Compound is a two-component, solvent-free, cement-based membrane. Comprised of an acrylic-based liquid compound and a Portland and other hydraulic cement-based powder. 

Ardex 8+9 can be applied easily with a paint roller or a brush to produce a highly flexible, waterproof coating. This coating protects from topside water infiltration and provides an excellent bonding layer for Ardex Tile and Stone Mortars. When properly installed, Ardex 8+9 reduces the risk of efflorescence and is IAPMO certified for use as a shower pan.

Ardex 8+9 Features:

  • Rapid setting – tile in as little as 90 minutes
  • Flood test in 4 hours
  • Crack isolation up to 1/8″ (3 mm)
  • Excellent coverage – up to 300 sq. ft. for commercial unit and up to 100 sq. ft. for convenient kit
  • Ideal for applications in commercial and residential bathrooms, showers and kitchens prior to the installation of tile and stone
  • For use in swimming pools
  • Use for interior or exterior floors and walls
  • Easy to apply with a roller
  • A solvent-free blend of Portland cement and other hydraulic cements for the ultimate bond with Ardex tile and stone mortars
  • Helps to prevent efflorescence from the substrate
  • Can be used in place of a shower pan liner

Installation:

Mixing Ratio Paintable Consistency:

  • 1 gallon (3.78 L) of Ardex 8 per 9 lb. (4 kg) of Ardex 9
  • (For small batches, 1 part Ardex 8 to 1 part Ardex 9 by volume)

Mixing Ratio Caulking Consistency:

  • 2/3 gallon (2.5 L) of Ardex 8 per 9 lb. (4 kg) of Ardex 9
  • (For small batches, 2/3 part Ardex 8 to 1 part Ardex 9 by volume)

Coverage:

  • 100 sq. ft. (2 coats) over drywall
  • Approx. 70 sq. ft. (2 coats) over concrete

Performance:

  • Pot Life: Up to 45 minutes
  • Drying Time: 30 – 45 minutes for initial coat
  • Approx. 60 minutes for final coat
  • Flood Test: Begin 4 hours after the second coat has been applied
  • VOC: 0
  • Storage: Store in a cool, dry area. Do not expose packages to sun. Keep liquid from freezing
  • Shelf Life: 1 year
  • Warranty: Ardex L.P. Standard Limited Warranty applies
More Information
SKUAR 8+9
In the Box
  • ARDEX 8 (liquid): 1 gallon (3.78 liters) bottle
  • ARDEX 9 (powder): 9 lb. (4 kg) bag
Non-ReturnableNo
ManufacturerArdex
Write Your Own Review
You're reviewing: Ardex 8+9 Rapid Waterproofing and Crack Isolation Compound Kit
Customer Questions
Can Ardex 8+9 be painted over with latex paint? It’s on cement block basement foundation walls?
Had to double check with our Ardex rep and re said that "ARDEX 8+9 is a top-side waterproofing membrane and intended to be covered with tile. And ARDEX has no testing data to support the finish you have described." If you need assistance with a project we may have some alternate suggestions, give us a call (800) 938-7925
Can you apply 8+9 over drywall for a shower
Yes, this from the Ardex Technical Data Sheet, available on our product page at the bottom of the description. " On interior applications, ARDEX 8+9 can be used over concrete and masonry finishes, existing tile, drywall, cementitious backer boards and plywood on all interior floors or walls prior to the installation of tile and stone."
Did you find what you were looking for?